X Close
Online Enquiry
Name *
Phone *
Email *
Enquiry
* Required fields

Contact Us

ABN

16 098 602 790

 

Address

8 Silkwood Rise, Carrum Downs,

3201, Victoria,  Australia

 

Telephone

toll-free from within Australia

1300 361 771

 

LATTICE AND DECOR SCREEN INSTALLATION

 

EASY TO WORK WITH


Matrix Lattice and Screens are easy to cut, bend and form to shape including curved corners and arches.
The best wat to cut Matrix Lattice and Decor Screen panels is using an electric jigsaw with a blade for timber.
Alternatively, you can use a hand saw for timber, but it will take a lot more effort.
We do not recommend using a circular saw due to the risk of cracking the panel.
Matrix Lattice and Decor Screen panels can be drilled using standard drill bits.
For best results, use sharp tools and low cutting or drilling speed.
Always wear appropriate hand, eye and hearing protection when using power tools.
 
VERSATILE IN APPLICATION... EASY TO INSTALL

Whatever your application, there is a simple installation method to provide the flexibility and ease of installation you need to create your outdoor masterpiece. 
 A range of recommended installation options below will ensure ease of construction and smart appearance.


 
FIXING METHODS


Installing Matrix Lattice and Decor Screens using one of our recommended methods will ensure a professional and durable finish.
Note: Our 15 year Warranty only applies when the panel has been installed in accordance with our installation instructions.
Detailed installation instructions are provided with each kit and can be downloaded from this web page; these instructions must be carefully followed in accordance with the Warranty conditions.

We also offer galvanised and powder coated steel posts and rails, and plastic post caps in matching or contrasting colours.
Balustrading
Option 1
C-Channel

1. MATRIX C-CHANNEL FRAME KIT

USE A MATRIX C-CHANNEL FRAME KIT FOR SECURING MATRIX LATTICE OR SCREEN IN THE FOLLOWING SITUATIONS:
  • TO THE INSIDE OF A FRAME
  • TO A WALL OR FENCE
  • TO THE FRONT OR BACK FACE OF A FRAME, POSTS OR RAILS
  • SPANNING BETWEEN POSTS OR RAILS
A Matrix C-channel frame kit is the recommended way to install Matrix Lattice or a Decor Screen.
It will hold the panel securely while allowing it to expand and contract with changes in temperature.
It is designed to fit around a full lattice or screen panel without cutting.
If the space is insufficient to fit a full framed panel, cut the same amount off the panel and the frame.
Click on the links below to download PDF instructions:
Each kit consists of the following components:
2 x long C-channels
2 x short C-channels
4 x plastic corners
10 x galvanised steel flat mounting brackets
10 x 22mm long x 3mm diameter galvanised steel pins for securing the panel within the C-channel
1 x instructions 
NOTE: Mounting screws are not included in the kit.
 

C-channel Frame Kit

Decor Screen with C-channel Frame

Diamond Lattice with C-channel Frame

2. DIRECT FIXING 

USE THIS METHOD FOR SECURING LATTICE OR DECOR SCREEN TO A WALL, FENCE OR FRONT / REAR FACE OF POSTS OR RAILS.
THIS CAN BE DONE USING A MATRIX SCREEN MOUNTING KIT OR SCREWS & WASHERS
 
Option 5 Direct Fixing
 

3. MATRIX DIAMOND CLIPS

USE MATRIX DIAMOND CLIPS FOR ATTACHING MATRIX LATTICE TO A WALL, FENCE OR FRONT / REAR FACE OF POSTS OR RAILS
 
Matrix Diamond Clips can be used to attach the lattice securely in place against any flat existing structure (e.g. posts or rails, a fence or a building) while allowing it to expand and contract with changes in temperature.
 
Matrix Diamond Clips are sold in packs of 12, which is sufficient to install a full 2410x1205mm sheet of Matrix Lattice.
 
 
 

4. TIMBER FRAMING MATRIX LATTICE OR SCREEN USING BEADING

USE THIS METHOD FOR SECURING LATTICE OR SCREEN WITHIN A NEW OR EXISTING TIMBER FRAME. 

Click here to download PDF instructions 

 
Option 4 Timber Framing

5.  GROOVING A TIMBER FRAME FOR MATRIX LATTICE OR DECOR SCREEN

USE THIS METHOD FOR SECURING LATTICE OR DECOR SCREEN WITHIN A GROOVED TIMBER FRAME